LifeSpan Treadmill Owner's Manual page 7

STEP 1:
STEP 2:
STEP 3:
FLITE
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (1) onto level
ground
1. Raise the Computer and Upright tubes in
the direction of the arrows .
Note: Whilst erecting the uprights, make sure the
upright does not press against and damage the
wires inside the upright tubes. Keep holding the
upright and computer by hand so they do not fall
down and cause injury
1. Using the 6# Allen wrench, screw through
the bolt (56) M10*15 to Lock washer (77),
then lock the Left upright tube onto MAIN
FRAME.
Note: Support the Uprights with your hands to
prevent them falling down and causing injury.
7