Changing The Phone's Name (Station Name); Viewing The Display Name Or Phone Number; Using Contacts - Cisco WIP310 User Manual

Chapter 3
Settings > Date/Time Settings
After navigating to Date/Time in the Settings menu, press
the Select button to see the Date and Time options
Up or Down Arrow key to navigate to the
1 Press the
setting you want to change
2 Press the Left or Right Arrow key to increase or
decrease the number for each setting
3 Press the Select button (check mark icon) to confirm
or press the Cancel soft key to exit without changes
Press the Back soft key to move back one screen Press the
Power/End Call button to return to the Home screen
Changing the Phone's Name (Station
Name)
The Station Name is the name of the phone that is shown
in the upper right of the Home screen
NOTE:
If this phone is part of a Linksys Voice
System and is registered to a SPA9000, the
Station Name also appears in the Corporate
Using Messaging
Directory See
1 In the Home screen, press the
Settings
Select button and scroll to navigate to
2 Press the
Display Settings
Select button to see the Display Settings
3 Press the
options
4 Press the Up or Down Arrow key to navigate to the
Station Name
Wireless-G IP Phone
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
22
on page
Select button to choose
5 Use the keypad to enter the name for your phone
6 Press the Select button (check mark icon) to confirm
or press the Cancel soft key to exit without changes
Viewing the Display Name or Phone
Number
To view the Display Name (the name that appears on
Caller ID) or Phone Number
1 In the Home screen, press the
Settings
2 Press the Select button and scroll to navigate to
Display Settings
3 Press the Select button to see the Display Settings
options
Up or Down Arrow key to navigate to Display
4 Press the
Name or Phone Number
Select button (check mark icon) to confirm
5 Press the
or press the Cancel soft key to exit without changes
Press the Back soft key to move back one screen Press the
Power/End Call button to return to the Home screen

Using Contacts

You can access the Contact menu by:
1 In the Home screen, press the
Settings
Right or Left Arrow button to scroll and
2 Press the
navigate to Contacts Press the Select button
OR
In the Home screen, press the Contacts soft key
Adding a Contact
Contacts
1 In the Contacts menu, press the
access the Contacts list All current Contacts appear If
there are no names, an empty list appears
Options soft key and press the Up or Down
2 Press the
Arrow key to navigate to Add New.
Using Your WIP310
Select button to choose
Select button to choose
Select button to
21