Coupling Your M-10000 - Lionel Century Club II Owner's Manual

Transformer operations

Coupling your M-10000

T rue to the prototype, the Lionel M-10000
features cars that are connected at
shared trucks. Connect a vestibule to one of
the cars at each articulation by pushing the
vestibule assembly into the end of the car.
The clasp slides over and catches the brass
ring, and the contacts lock around the post.
Next, arrange the cars on the track and,
holding them horizontally, slide the
Clamp
Figure 2. Coupling the M-10000
Brass ring
5
vestibules into the ends of the cars. Once
again, the clasp will catch the brass ring
and the contacts will lock around the post.
Be sure track power is off
Caution!
before coupling the cars to
prevent accidental short
circuits.
Contact
Vestibule
Contact
post