Disconnect Device - Xerox Document Centre ColorSeries 50 User Manual

WARNING: Never push objects of any kind into
slots or openings on this equipment. Making a
1
contact with a voltage point or shorting out a part
could result in fire or electrical shock.
•
2
3
The power cable is the disconnect device for this
equipment. It is attached to the back of the
4
machine as a plug-in device. To remove all
electrical power from the machine, disconnect the
power cable from the electrical outlet.
5
6
7
If any of the following conditions occur, switch
off the power to the machine immediately and
disconnect the power cord from the electrical
outlet. Call an authorized Xerox service
representative to correct the problem.
– The machine emits unusual noises or
odors.
– The power cord is damaged or frayed.
– A wall panel circuit breaker, fuse, or other
safety device has been tripped.
– Liquid is spilled into the copier/printer.
– The machine is exposed to water.
– Any part of the machine is damaged.

Disconnect Device

V DOCUMENT CENTRE CS 50 USER GUIDE