Document Glass - Xerox Document Centre ColorSeries 50 User Manual

1
After you have selected the desired features, you
should place the original document onto the
Document Glass. Raise the Duplex Automatic
Document Feeder and place (register) the
document in the correct orientation on the
Document Glass for long edge feed or short edge
feed, as illustrated in Figure 13.
2
NOTE: You can set the orientation on a number of
user screens or the System Administrator can
change the default orientation in Tools Mode.
The document must be face down and in the
upper-left corner of the Document Glass.
Lower the Duplex Automatic Document Feeder
and press the Start button to begin the scan
3
operation.
KEY POINT:
•
4
•
5
6
7
GETTING TO KNOW YOUR COPIER / PRINTER

Document Glass

When a document is scanned short edge first,
but the requested paper tray holds paper so it
will print long edge first, the Auto Rotation
feature will cause a document to be rotated
90°. If the output is to be 2-sided, the second
side will be rotated 270° to maintain head-to-
head output.
The maximum scanned image size is 11 x 17
inches or A3. To copy an image of this size
onto 12 x 17.7 inch or SRA3 paper, you must
select 102% enlargement.
Figure 13: Registering a document
2–14
on the Document Glass
DOCUMENT CENTRE CS 50 USER GUIDE