INTRODUCTION The AT-CV41R switches 4 Inputs of Component Video (YPbPr), Stereo Analog Audio and Digital Coaxial Audio with IR remote. This Switcher offers 2 ways of operation: You could either use the remote control or manual switching with the button on the switcher. The remote control usage allows a full customization of inputs. In other words you could change the way the switcher will be switching when using a remote.
Step 2: The CH1 LED Indicator will flash. At the same time beam your IR Remote Controller to the IR receiv- ing window of the AT-CV41R and press any key for selecting Channel 1, say number 1, CH 1 LED will be off.
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-CV41R. Opening the product will void the warranty.
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has been advised of the possibility of such damages. Such damages include but are not limited to: special, inciden- tal, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss of business information, or any other pecuniary loss.
ATLONA PRODUCT REGISTRATION Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.