Atlona AT-CW-41 User Manual

Step 3:
At the same time, please beam your IR remote controller to the IR receiving
window of AT-CW-41 and press any key for selecting channel 2, say number 3,
CH2 LED will be off.
Step 4:
Setting of CH3, CH4 is the same with previous procedure. When you finished all
the setting, then this switch box will switch to the channel that before this
IR-Learning mode..
*You can press LEARN key for aborting IR learns during learning
procedure.
During the learning process, each function key should be defined
within 8 seconds, if you are not setting the related key within 8 seconds.
You need to do it again with previous steps
Mechanical Operation
This box can be use manually, the LEARN key is used for mechanical switch. If
you want to change the input channel, you can only press the button once.
There will be a LED indication for what channel it is.
The procedure is a cyclic function
CH1->CH2->CH3-*CH4-i
r
Component
Video Audio and Digital Audio Selector
4 input 1 output
CORPORATION
For the best performance of this switch box, please read this manual carefully
and keep it for further information
Before you start:
*The component video has 2 different categories, please make sure that
component video of your input devices and your TV set are the same format.
*PCM audio is only workable in case that your audio processor or amplifier with
PCM(SPDIF) decoder.
Content of Package
• AT-CW-41
• AC-DC Adaptor
• Remote control