Scan Test - Fujitsu ScanSnap iX500 Getting Started Manual

Scan Test

After you perform a scan, check the linkage with applications.
For details on documents that can be scanned with the ScanSnap and how to load documents, refer to
"ScanSnap Overview" in the Operator's Guide.
ATTENTION
If the ScanSnap Manager icon is
mobile device. When the connection between the mobile device and the ScanSnap is disconnected, the
ScanSnap Manager icon changes to
1.
Load a document in the ScanSnap.
1. Pull the stacker on the ADF top section towards
you.
2. Prepare to load a document in the ScanSnap.
3. Load the document on the ADF paper chute
(cover), and adjust the side guides to the size of the
document.
( )/ (
( )/ (
11
), exit ScanSnap Connect Application on the
).
Pull Out the Extension
Open the Side
Guides
Raise the
Stacker
Set the
Document
Face-down
and Top-first
Stacker