Fujitsu ScanSnap iX500 Getting Started Manual page 12

2.
Press the [Scan] button on the ScanSnap.
Scanning starts. The Quick Menu appears when
scanning is completed.
ATTENTION
If scanning does not start, refer to "Troubleshooting"
in the ScanSnap Manager Help.
3.
In the Quick Menu, click the icon of the
application to link with ScanSnap Manager.
The selected application is started.
Confirm that ScanSnap Manager is linked with the application that was selected from the Quick Menu.
Connecting the ScanSnap to a Mobile Device via
Wireless LAN
To connect the ScanSnap to the wireless LAN, follow the instructions on the screen that is displayed
after the installation.
1.
On the wizard screens for connecting the ScanSnap to the wireless LAN, click the [Next]
button (
The [Preparation] screen appears.
) or the [Continue] button ( ).
12