Removing The Protective Packaging; Installing The Software - Fujitsu ScanSnap iX500 Getting Started Manual

Removing the Protective Packaging

Follow the procedure described below to remove the protective packaging before using the ScanSnap.
1.
Open the ADF paper chute (cover) (1), and
pull the tape to remove the protective foam
sheet (2) from the stacker. Open the stacker
(3) and pull the tape to remove the
protective sheet from the ADF top section
(4).
2.
Pull the ADF release tab to open the ADF
top section, and pull the tape to remove the
protective card from the side guides.
CAUTION

Installing the Software

®
Windows Installation (
Mac OS Installation (
ATTENTION
Do not connect the ScanSnap to your computer before installing the software.
HINT
When you export the data scanned by the ScanSnap to your mobile device, download ScanSnap Connect
Application from an application store such as the App Store or Google Play.
If the magnetic part of the ADF top section makes contact with the black magnetic part
of a magnetic card or IC card, the data on the card may be lost.
page 4)
page 7)
ADF Paper Chute (cover)
1
3
Stacker
ADF Top
Section
Magnets
3
4
ADF Top
Section
2 2 2
Protective
Card and
Tape
ADF Release Tab