Fujitsu ScanSnap iX500 Getting Started Manual page 13

2.
After performing the preparations as described on the screen, click the [Next] button
( ) or the [Continue] button (
The [Wireless LAN setting] screen appears.
3.
Connect the ScanSnap to the wireless LAN.
Proceed by following the instructions on the screen.
The [Check mobile connection] screen appears.
4.
Connect the ScanSnap to the mobile device.
Install ScanSnap Connect Application in the mobile device, enter the password, and check
whether the mobile device is connected to the ScanSnap.
For details, refer to the screen that is displayed after the screens below.
When the mobile connection check is complete, "Wireless network setup is complete" appears.
5.
Click the [Finish] button.
).
13