Fujitsu ScanSnap iX500 Getting Started Manual page 8

3.
Double-click the [ScanSnap] icon.
Follow the instructions on the screen to continue with
the installation.
When you proceed with the operation, the [ScanSnap
- Connecting the ScanSnap] window appears.
4.
Follow the instructions on the screen to connect
the ScanSnap to the computer.
Click the [Next] button, and follow the instructions on
the screen to connect the ScanSnap to the
computer.
For details, refer to
(page 9).
When the connection check is complete, the
[ScanSnap Wireless Network Setup] window
appears.
Check the ScanSnap operation before connecting the
ScanSnap and a mobile device via wireless LAN.
5.
Check the operation of the ScanSnap.
For details, refer to
6.
Select whether you want to configure the wireless
settings for connecting the ScanSnap and the
mobile device via wireless LAN.
To configure the wireless settings, click the [Setup
Now] button, and then follow the instructions on the
screen. For details, refer to
ScanSnap to a Mobile Device via Wireless LAN"
(page 12)
.
Otherwise, click the [Later] button.
HINT
If you want to configure the wireless settings for connecting the ScanSnap and the mobile device via
wireless LAN at another time, refer to the Operator's Guide.
7.
Remove the Setup DVD-ROM from the DVD-ROM drive.
"Connecting the ScanSnap"
"Scan Test" (page 11).
"Connecting the
8
.