Reset To Factory Default Settings; Upgrading System Firmware - Thecus IP Storage Server N8800 User Manual

Module File
Browse
Install
NOTE

Reset to Factory Default Settings

From the System menu, choose the
Factory Default item and the Reset to
Factory Default screen appears. Press
Apply to reset the N8800 to factory default
settings. Press Cancel to go back to the
main menu.
WARNING

Upgrading System Firmware

From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
NOTE
WARNING
Location of the module file.
Click to browse the folder of your PC to locate the module files.
Click to install the listed module into your N8800
Modules can potentially harm your system. Only
your vendor, or publishers you can trust.
Resetting to factory defaults will not erase the data
disks, but WILL revert all the settings to the factor
• The beeper only beeps if it is enabled in the System Notification
menu.
• Check Thecus website for the latest firmware release and release
notes.
Do NOT turn off the system during the firmware upgrade process. This
will lead to a catastrophic result that may render the system inoperable.
63
install modules from
stored in the hard
y default values.