Reset To Factory Default Settings; Upgrading System Firmware - Thecus N7700 User Manual

Enable/Disable
Check Update
Module File
Browse
Install
NOTE

Reset to Factory Default Settings

From the System menu, choose the
F actory Default item and the Reset to
F actory Default screen appears. Press
A pply to reset the N7700 to factory default
s ettings. Press Cancel to go back to the
m ain menu.
WARNING

Upgrading System Firmware

F
rom the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade s
Follow the steps below
fi rmw re: a
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
NOTE
WARNING
Click to enable a module.
Click to look for updates for the selected module.
Location of the module file.
Click to browse the folder of your PC to locate the module files.
Click to install the listed module into your N7700
Modules can potentially harm your system. Only install modules from
your vendor, or publishe
Resetting to factory defau
disks, but WILL revert a ll the settings to the factory default values.
creen appears.
to upgrade your
• The beeper only beeps if it is enabled in the System Notification
menu.
• Check Thecus we bsite for the latest firmware release and release
notes.
Do NOT turn off the system d
will lead to a catastrophic resu
57
rs you can trust.
lts will not erase the data stored in the hard
uring the firmware upgrade process. This
lt that may render the system inoperable.