Reset To Factory Default Settings; Upgrading System Firmware - Thecus N3200PRO User Manual

Reset to Factory Default Settings

From the System menu, choose the
Factory Default item and the Reset to
Factory Default screen appears. Press
Apply to reset the N3200PRO to factory
default settings. Press Cancel to go back to
the main menu.
WARNING

Upgrading System Firmware

From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
NOTE
WARNING
Resetting to factory defaults will not erase the data stored in the hard disks, but
WILL revert all the settings to the factory default values.
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.
Do NOT turn off the system during the firmware upgrade
catastrophic result that may render the system inoperable.
44
process. This will lead to a