Firmware Upgrade; Ups Setting - Thecus N8800SAS User Manual

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
1. Use the Browse button
2. Press Apply.
3. The beeper beeps and the Busy LED blinks until the upgrade is complete.
NOTE
WARNING

UPS Setting

The N8800SAS can also support various uninterruptible power supply units via
either "Serial" or "USB" interface, providing extra data security and accessibility in
the case of a power failure.
From the Status menu, choose the UPS item and the UPS Setting screen appears.
Make any changes you wish, and press Apply to confirm changes.
to find the firmware file.
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.
Do not turns off the system during the firmware upgrade process.
This will lead to a catastrophic result that may render the system inoperable.
31