Hitachi HV-D20P Operation Manual page 61

Error message
AUTO WHITE：NG
CHANGE TO CAM
TRY AGAIN
AUTO WHITE：NG
CHANGE TO MEMORY MODE
TRY AGAIN
AUTO WHITE：NG
LOW LIGHT
TRY AGAIN
AUTO WHITE：NG
HIGH LIGHT
TRY AGAIN
AUTO WHITE：NG
C.TEMP HIGH
TRY AGAIN
AUTO WHITE：NG
C.TEMP LOW
TRY AGAIN
AUTO WHITE：NG
LONG SHUTTER MODE
CHANGE SHUTTER MODE
TRY AGAIN
CAM MODE：AUTO
CHANGE TO MANUAL
48
・ Turn off the color bar.
・ Set up WHITE BAL:MEM.
・ White balance cannot be made due to insufficient illumination.
・ Increase the intensity of illumination, turn lens iris toward open direction,
or increase the gain to provide a proper video level.
・ Press the AWB switch again.
・ White balance cannot be made due to excess illumination.
・ Increase the intensity of illumination, turn lens iris toward closed
direction, or increase the gain to provide a proper video level.
・ Press the AWB switch again.
・ The color temperature is too high, making it impossible to reach the
optimum value in adjustment.
application, use the camera under the current condition.)
・ Add a filter to the lens or illumination to decrease the color temperature.
・ The color temperature is too low, making it impossible to reach the
optimum value. (If there is no problem in practical application, use the
camera under the current condition.)
・ Add a filter to the lens or illumination to increase the color temperature.
・Release the long shutter mode.
・Set camera mode to manual.
Procedure
(If there is no problem in practical