Rear Panel Facilities; Name And Function Each Section - Hitachi HV-D20P Operation Manual

Name and function each section

MENU button
Press this button to display the camera setup
menu. The buttons U, D, L and R provide different
functions depending on whether the menu is
displayed (MENU mode) or not (DERECT mode).
VIDEO connector
Outputs a composite video signal(1Vp-75
ohms).
Pilot lamp
Lights when power is supplied.
REMOTE connector
Used for connection with the remote control box
RC-Z3 or personal computer.
DC IN connector
The 12V power supply is connected.
MULTI connector
Output for RGB, Y/R-Y/B-Y, or Y/C and
VBS signals.
Also used for sync signal I/O and external
trigger signal input.
LENS connector
Lens iris control signal connector; connect the
iris connector of an auto iris lens.
For details of each connector, refer to the description of connectors (page 64).
AWB/L button
DERECT mode:
Holding down this button for more than two seconds carries out
auto white balance (AWB).
MENU mode:
In this mode, it is allowed to change functional data or
carry out each function.
ＭＥＮＵ
U
ＶＩＤＥＯ
ASC ＦＩＬＥ
L
ＰＯＷＥＲ
ＢＡＲ
ＡＷＢ
D
ＲＥＭＯＴＥ
ＭＵＬＴＩ
ＤＣ ＩＮ
ＬＥＮＳ
－
Ａ
Ｃ
＋
Ｂ
U button
DERECT mode:
While holding down this button for more than
two seconds and press the D button carries
out auto shading compensation (ASC).
MENU MODE:
Pressing this button moves the cursor up.
R
FILE/R button
DERECT mode:
Selects the scene file. Press once to show the
present file name for 1 second. During the
display, press again to change the scene file.
MENU mode:
In this mode, it is allowed to change
functional data or carry out each function.
BAR/D button
DERECT mode:
Press this button to turn on/off a color bar
signal.
MENU mode:
Pressing this button moves the cursor up.
5