Hitachi HV-D20P Operation Manual page 27

2) WHITE BAL : White balance mode
• PRST 3200K
• PRST 5600K
• MEM : White balance is automatically adjusted by the direct mode AWB button.
• AUTO
Note: In the Auto CAM mode, white balance is fixed at AUTO.
3) AGC : AGC ON/OFF
• ON : Gain is adjusted automatically to compensate for scene brightness.
The adjustment range is set by Limit from +6 to +24 dB in 1 dB steps.
• OFF : Gain is fixed and manually adjustable in 1 dB steps from 0 to +24 dB.
4) DTL：DTL level setup
• OFF
• LOW
• NORMAL
• HIGH
• VARIABLE
14
: The white balance condition is optimized at a color temperature of 3200K.
: The white balance condition is optimized at a color temperature of 5600K.
: The white balance condition is set through real time auto white balancing
(automatic tracking white balance).
The adjustment speed can be selected with A.WHITE SPEED of SUB MENU 1.
: DTL OFF
: DTL level decrease and a picture becomes soft.
: DTL level is standard.
: DTL level increase and a picture becomes sharp.
: DTL level is VARIABLE value under a line.
The DTL level can be set to in a range of -128 to 127. The degree of contour
correction increases in the positive value setting, and it decreases in the negative
value setting. For zero (0) setting, hold down both the L and R buttons for
approx. two seconds.