Hitachi HV-D20P Operation Manual page 45

7) Width : Sets color phase range for setting
Setting range is -128 (narrow) to 127 (wide). Since the VBS output is shown as monochrome on the
monitor, a monochrome indication can also be used for an approximate setting. Press both L and R for
about 2 seconds to set to 0.
Note : At RGB or R-Y, B-Y output, the detected phase range is not shown on the monitor. Use a VBS
signal for color detail setting.
8) Initialize : Returns level menu settings to preset values. Simultaneously press L and R for about 2
seconds.
9) File select : Selects scene files 1 - 4 and preset.
10) DTL SUB : Change to DTL SUB menu.
32