Connector / Header Locations and Pin-outs
5.7.6
The server board provides one external RJ45 Serial 'B' port (J9A2) and one internal 9-pin Serial 'A' port
header (J1B1). The following tables define the pin-outs for each.
Table 27. External RJ-45 Serial 'B' Port Pin-out (J9A2)
Pin
1
SPB_RTS
2
SPB_DTR
3
SPB_OUT_N
4
GND
5
SPB_RI
6
SPB_SIN_N
7
SPB_DSR _DCD
8
SPB_CTS
Note:
1
A jumper block on the server board will determine whether DSR or DCD is routed to pin 7. The
board will have the jumper block configured with DSR enabled at production.
Table 28. Internal 9-pin Serial 'A' Header Pin-out (J1B1)
Pin
1
2
3
4
5
6
7
8
9
5.7.7
Two stacked PS/2 ports (J9A1) are provided to support both a keyboard and a mouse. Either PS/2 port
can support a mouse or keyboard. The following table details the pin-out of the PS/2 connector.
Table 29. Stacked PS/2 Keyboard and Mouse Port Pin-out (J9A1)
Pin
1
2
3
4
5
6
7
8
9
58
Serial Port Connectors
Signal Name
RTS (request to send)
DTR (Data terminal ready)
TXD (Transmit data)
Ground
RI (Ring Indicate)
RXD (receive data)
Data Set Ready / Data Carrier Detect 1
CTS (clear to send)
Signal Name
SPA_DCD
SPA_DSR
SPA_SIN_L
SPA_RTS
SPA_SOUT_N
SPA_CTS
SPA_DTR
SPA_RI
GND
Keyboard and Mouse Connector
Signal Name
KB_DATA_F
Keyboard Data
TP_PS2_2
Test point – keyboard
GND
Ground
P5V_KB_F
Keyboard / mouse power
KB_CLK_F
Keyboard Clock
TP_PS2_6
Test point – keyboard / mouse
MS_DAT_F
Mouse Data
TP_PS2_8
Test point – keyboard / mouse
GND
Ground
Revision 1.4
Intel order number: D31979-007
®
Intel
Server Board S5000PAL / S5000XAL TPS
Description
Description
DCD (carrier detect)
DSR (data set ready)
RXD (receive data)
RTS (request to send)
TXD (Transmit data)
CTS (clear to send)
DTR (Data terminal ready)
RI (Ring Indicate)
Ground
Description