Table of Contents
Advertisement
16. AUTO WHITE
Detailed setting concerning white balance correction.
1) SPEED : Sets real-time auto white balance response speed.
Standard : Usual setting
•
Slow
: Sets slow convergence speed.
•
2) HIGH LIMIT : Sets the upper limit (Blue side) of a color temperature
range within which white balance is to be applied. If a Blue subject
is excessively corrected to white, a natural image is obtained by
reducing this value.
Range of Setting : LOW LIMIT ~ 15000K (Kelvin)
Unit of Setting : 100K
3) LOW LIMIT : Sets the lower limit (Red side) of a color temperature range within which white balance is to
be applied. If a Red subject is excessively corrected to white, a natural image is obtained by increasing
this value.
Range of Setting : 2000K ~ HIGH LIMIT
Unit of Setting : 100K
(Complimentary Note)
Real time auto white adjust the white within the range of LOW LIMIT~HIGH LIMIT
There will be the following approx. standard of color temperature.
Light bulb : 2800~3500K
Sun light : 5500~6500K
38
AUTO WHITE
[FILE1 ]
SPEED
:STANDARD
HIGH LIMIT
:10000K
LOW LIMIT
: 2500K
WHITE GATE
:OFF
GATE AREA H
:
4
GATE AREA V
:
2
INITIALIZE
:[PUSH L+R] 2SEC
Advertisement
Table of Contents
