Table of Contents
Advertisement
11. LEVEL
The hue in dark and bright part of the red and blue image signal is adjusted.
1) ENABLE : Level control ON/OFF setting.
Note : ENABLE is fixed at OFF for CAMERA MODE : AUTO.
2) R GAIN : Sets bright part of red
The allowable setting range is -128 to 127. Press the R button to
increase the Red video signal gain and press the L button to decrease
the Red video signal gain. Press the L and R buttons simultaneously
for about 2 seconds for 0 (zero) setting.
3) B GAIN : Sets bright part of blue
The allowable setting range is -128 to 127. Press the R button to
increase the Blue video signal gain higher and press the L button to
decrease the Blue video signal gain. Press the L and R buttons
simultaneously for about 2 seconds for 0 (zero) setting.
4) R BLACK : Sets dark part of red
The allowable setting range is -128 to 127. Press the R button to increase the Red video signal black level
and press the L button to decrease the Red video signal black level. Press the L and R buttons
simultaneously for about 2 seconds for 0 (zero) setting.
5) B BLACK : Sets dark part of blue
The allowable setting range is -128 to 127. Press the R button to increase the Blue video signal black
level and press the L button to decrease the Blue video signal black level. Press the L and R buttons
simultaneously for about 2 seconds for 0 (zero) setting.
6) INITIALIZE : Initializes the LEVEL menu settings. Press L and R buttons simultaneously for about 2
seconds for initialization. (Only the selected scene file is initialized.)
28
LEVEL
[ FILE1 ]
ENABLE
:OFF
R GAIN
:
0
B GAIN
:
0
R BLACK
:
0
B BLACK
:
0
INITIALIZE
:[PUSH L+R] 2SEC
Advertisement
Table of Contents
