Auto Setup - Hitachi HV-HD201 Operation Manual

6. AUTO SETUP

Menu for initial image adjustment
1) AUTO WHITE : Automatically adjust the white balance.
Move the cursor to AUTO WHITE and press and "R" button for 1
second or more for automatic white balance adjustment. The same
function can be executed also by pressing the "AWB" button on the
camera's front face for 2 seconds, when the menu is not displayed.
Set WHITE BALANCE of MAIN MENU to MEMORY before
executing this function.
2) AUTO BLACK: Color balance drift of the dark side is automatically
adjusted.
Move the cursor to AUTO BLACK and press "R" button for 1 second
or more to execute the AUTO BLACK function.
3) AUTO SHADING: Color shading in the vertical direction of the screen attributable to the coupling of the
color separating prism with the lens is automatically adjusted.
To execute this function, the following arrangement must be done.
Subject: Fully white subject (copy paper or the like)
Illumination: Illuminate the subject with uniform luminance.
Camera: Set the camera so that the subject is displayed in the whole screen. Maximize the amount of
light by using IRIS GAIN without causing saturation (white saturation).
Move the cursor to AUTO SHADING and press "R" button for 1 second or more to execute the AUTO
SHADING function.
4) SHADING COMPEN.: Shading correction by AUTO SHADING is turned ON/OFF.
If AUTO SHADING is executed in OFF state, the adjustment result is memorized in the camera, but
shading correction is not effective.
AUTO SETUP
AUTO WHITE :[PUSH R] 1SEC
AUTO BLACK :[PUSH R] 1SEC
AUTO SHADING :[PUSH R] 1SEC
SHADING COMPEN.:ON
23