Testing Bike - Star Trac Turbo Trainer Owner's Manual

T B
esting ike
Use this checklist to perform the bike test procedure.

Recheck all the bolts and make sure they are all tightened to the proper torque specification (when indicated) and no parts are
missing.

Test the seat post to make sure they move freely and you are able to lock in at different positions.

Check the seat to make sure it is level and tight and does not rotate around or tilt. Tighten and adjust as needed.

Test the seats horizontal adjustment for movement front to rear and check it by settings it at different settings.

Adjust seat post to your needs (Refer to page 23). Ride / test the bike for proper operation according to this owner's manual.
CAUTION: The movement arms move whenever the pedals are turning. Do Not dismount the bike until the pedals and
movement arms come to a complete stop.

Pedal the bike at a moderate pace and test for proper and smooth movement of the pedals and arms.

When the testing is complete, even the movement arms, and tip the bike forward using the ams and roll it on a smooth surface to
the final location and adjust the leveling feet so the bike is stable.
TURBO TRAINER Manufactured by STAR TRAC OWNER'S MANUAL | 21