Maintenance; Moving And Leveling; Preventive Maintenance; Daily Maintenance - Star Trac Turbo Trainer Owner's Manual

Table of Contents

aintenance

This section provides the procedures to maintain the Turbo Trainer in serviceable condition.

Moving & Leveling

To move the bike to a new location:

Lift the bike from the rear and use the front wheels (located on the front leg, below the handlebar) to roll the bike from one location to

another.

To level the bike:

Use the four leveling adjusters (located on the underside of the front and rear legs) to compensate for uneven floor surfaces.

Perform regular scheduled preventive maintenance procedures to maintain your Turbo Trainer bike in serviceable condition.

The life of your Spinning product will be determined by how consistently you perform the daily maintenance procedures. Dry the

Spinning bike after each use to remove sweat and moisture. It is best to use a liquid non-abrasive cleaner diluted with water.

Wipe Down / Cleaning

To prevent the build-up of rust and other forms of corrosion, wipe down the bike at the end of each day (or preferably at the end of each

class). Raise all posts to the highest setting to expose moisture. Using an absorbent cloth, focus on all areas that perspiration can settle.

Give particular attention to the following areas:

• Handlebars

• Seat / adjustable slide for the seat

• Back leg assembly

• Guard

• Pop-pins

• Leveling feet

NOTE: Never use abrasive cleaning liquids or petroleum-based solvents when wiping down the bike.

TURBO TRAINER Manufactured by STAR TRAC OWNER'S MANUAL |

Table of Contents

Show Quick Links

Table of Contents