13. Attach the left & right plastic foot stand covers (Fig. 14) over the
mounting plates and secure the covers from the underside by
bolting four button head cap screws along with washers into the
corresponding four available holes.
Hardware
M8 x 15mm Button Head Bolt
M8 x 16mm O.D. Flat Washer
14. Locate the left & right foot pedals.
ASSEMBLY TIP
Each pedal has an "L" or "R" marking (Fig. 15)
stamped into the strap that indicates the user side
for installation purposes.
15. Insert each pedal (Fig. 16) into the corresponding crank
arm.
18
| TURBO TRAINER Manufactured by STAR TRAC OWNER'S MANUAL
QTY
8
8
Fig. 13
Fig. 14
Fig. 15