Table of Contents
Advertisement
3.4.3.6
Keyboard/Mouse
The keyboard and mouse connectors are PS/2 style, six-pin stacked miniature DSUB
connectors. The top connector is for the mouse and the bottom connector is for the
keyboard.
3.4.3.7
32 bit/33 MHz PCI Connectors
Two industry standard 32 bit/33 MHz PCI connectors are provided on the evaluation
board. These slots support 3.3 V and 5 V devices.
3.4.3.8
Ethernet 10/100 LAN Interface connector
The evaluation board provides support for one Industry standard 10/100 RJ45 LAN
Interface Connector (Integrated with the dual USB connector).
3.4.3.9
LVDS Flat Panel Display Interface
The evaluation board provides support for one forty-four pin LVDS video interface
connector. The provided LVDS connects to most flat panel display assemblies.
3.4.4
Post Code Debugger
A port 80-83 display at CR6A1, CR6A2, CR6A3, and CR6A4 show cycles and can be
used for debug information during POST. The evaluation board uses an AMI* BIOS.
For AMI* BIOS POST codes, please visit:
3.5
Clock Generation
The Mobile Intel
compatible solution. The FSB frequency is determined from decoding the processor
BSEL settings.
The clock generator provides Processor, GMCH, ICH6-M, PCI, PCI Express, SATA, and
USB reference clocks. Clocking for DDR2 is provided by the GMCH.
Table 4.
System Clocks
CPU
DDR2
PCI Express and DMI
SATA
PCI
Audio
USB
3.6
Power Management States
The evaluation board supports S1 (Stop Grant), S3 (Suspend to RAM), S4 (Suspend to
disk), and S5 (Soft-off) states. Transition requirements are detailed below.
®
Mobile Intel
915GME Express Chipset
Development Kit User's Manual
28
®
915GME Express Chipset board uses a CK-410M and CK-SSCD
Clock Name
133 MHz @ 533
100 MHz @ 400
100 MHz @ 400
133 MHz @ 533
100 MHz
100 MHz
33 MHz
14 MHz
48 MHz
®
Mobile Intel
915GME Express Chipset —Theory of Operation
http://www.ami.com
Speed
April 2007
Order Number: 317230-001US
Advertisement
Table of Contents
