Completed Measurement; Interpreting The Measurement Results; Who Indicator; Pulse Arrhythmia Detection (Pad) Indicator - Microlife CARDIO+ Instruction Manual

For accurate blood pressure measurement
Table of Contents

Advertisement

Completed Measurement

• After the results are shown, the measurement is complete.
• Your systolic and diastolic blood pressure and your pulse are
displayed in the results.
• Remove the cuff and save the measurement results.
Interpreting the Measurement
Results

WHO Indicator

The color of the «WHO» icon indicates the results of your measurement.
To check the evaluation of the measurement, press the «WHO» icon.
The higher value is used in this evaluation, even if the other value
is normal.
Example: 150/85 mmHg indicates «Blood pressure too high».
120/98 mmHg indicates «Blood pressure too high».

Pulse Arrhythmia Detection (PAD) Indicator

The «
» symbol indicates that certain pulse irregularities were
PAD
detected during the measurement:
• If the result deviates from your normal blood pressure, repeat the
measurement.
• If this symbol appears on a regular basis (e.g., several times a week
when measurements are taken daily), we advise you to inform your
doctor and show the following explanation.
☞ Early Detection of Pulse Arrhythmia
This device is an oscillometric blood pressure monitor that also
analyzes pulse rate during measurement. Although it does not replace
a cardiac examination, this device has been clinically tested and can
detect pulse irregularities at an early stage.
The «
» symbol is displayed if pulse irregularities have been
PAD
detected. If this symbol appears frequently, we recommend that the
patient seek medical advice.
8
EN

Advertisement

Table of Contents
loading

Table of Contents