Page 1
Item #301-469 Model #14414 USE AND CARE GUIDE HOLLANDALE 52 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-527-0998 HAMPTONBAY.COM THANK YOU...
Table of Contents Table of Contents ............2 Operation ..............13 Safety Information ............2 Care and Cleaning ............13 Warranty .................3 Troubleshooting ............14 Pre-installation .............. Service Parts ............... 15 Specifications ................Tools Required ................. Hardware Included ..............Package Contents ..............Installation ..............Assembly ...............
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Part Description Quantity Blade Fan housing Blade bracket Light kit plate Mounting plate Light kit (Socket ring preassembled) Fan motor assembly Glass shade Please contact 1-800-527-0998 for further assistance.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced.
Assembly — Hanging the Fan Hanging the fan motor assembly Attaching the mounting plate to from the mounting plate the electrical box □ Align the slot hole in the fan motor assembly mounting WARNING: To reduce the risk of fire, electric shock or bracket (I) to the J hook on the mounting plate (C).
Page 8
Assembly — Hanging the Fan (continued) Making the electrical connections □ If you wish to install an optional wall control, use this diagram WARNING: To avoid possible electrical shock, be sure as a guide but refer to the installation manual for the wall electricity is turned off at the circuit breaker or main fuse box control for the correct color and wire connections.
Assembly — Hanging the Fan (continued) Attaching the fan motor assembly Finishing the fan installation to the mounting plate □ □ After completing the electrical connections, align the four Remove the two screws (UU) and loosen the two screws (VV) screw holes between the mounting bracket (I) and the on the mounting plate (C).
Assembly — Attaching the Fan Blades Fastening the blade to the Fastening the blade blade bracket assemblies to the motor □ □ Attach the fan blades (A) to the blade brackets (B) by Tighten the blade assemblies (J) onto the bottom of the using three blade screws (AA) and ber washers (BB).
Assembly — Installing the Light Kit Attaching the light kit plate Attaching the light kit to the to the mounting ring light kit plate □ □ Remove one of three mounting ring screws (WW) and Remove the three screws (XX) on light kit plate (F).
Page 12
Assembly — Installing the Light Kit (continued) Installing the glass shades and bulbs □ To install light kit glass shades (H), remove the socket rings (ZZ) on the light kit (G) and install the glass shades (H) to the light kit (G). Secure by tightening the socket rings (ZZ) previously removed.
Operation Turn on the power and check the operation of your fan. There are two pull chains used to operate your fan. The 3-speed pull chain controls the fan speed as follows: 1 pull- High, 2 pulls- Medium, 3 pulls- Low, and 4 pulls- Off. The light kit pull chain turns the light kit "ON"...
Troubleshooting WARNING: Ensure the power is off at the electrical panel box before you attempt any repairs. Refer to the section “Making the Electrical Connections” on page 8. Problem Solution □ Check the main and branch circuit fuses or breakers. □...
Service Parts Part Description Part Description Blade Blade screw (3/16”x8mm) Blade bracket Fiber washer Mounting plate Blade bracket screw (1/4”x12.7mm) Fan motor assembly Mounting plate screw (1/4”x12.7mm) Fan housing Plastic wire nut Light kit plate Pull chain fob Light kit (Socket ring preassemblde) Balancing kit Glass shade 40W candelabra bulb...
Page 16
Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-527-0998 HAMPTONBAY.COM Retain this manual for future use. RM262 000001-HD...