End Of Programme - NEFF Washer Dryer Instruction Manual And Installation Instructions

End of programme

Without final spin
28
The washing and drying programmes finish
automatically. End appears in the display, and the m
Time to end LED lights up.
q Turn the programme selector to m Off.
q Remove the washing from the drum.
q Leave the door open to allow the inside of the
washer dryer to dry out.
q Turn off the tap.
At the start of the wash cycle, the spin speed was set
to 000. The washing is held in the last rinse water.
At the end of the washing programme the display
alternates between STOP and 0000 (spin speed 0).
The Spin LED lights up.
q Set the programme selector to Drain+Spin b+B.
q Press the Start/Stop M button.
The water is drained away. The washer dryer does not
spin. The programme has ended when End appears
in the display.
q Remove the dripping wet washing.
or
q Set the programme selector to Drain+Spin b+B.
q Press the Spin B button repeatedly until the
required spin speed is set, page 21.
q Press the Start/Stop M button.
The water is drained away. The washer dryer spins.
The programme has ended when End appears in the
display.
q Remove the laundry.
q Leave the door open to allow the inside of the
washer dryer to dry out.
q Turn off the tap.