NEFF Washer Dryer Instruction Manual And Installation Instructions page 19

M Start/Stop button
Pausing the programme
Stopping the programme
I Reduced Time
button
W Delay Timer
button
Reset Delay time
Press this button to start the selected programme.
The M Start/Stop LED is constantly on from the start
of the programme until the end.
Press the M Start/Stop button while the programme
is running, and keep it pressed until STOP appears in
the display (approx. 3 seconds). While the programme
is paused the LED M Start/Stop flashes, with STOP
and --- alternating in the display.
To resume the programme, press the M Start/Stop
button again.
Press the M Start/Stop button while the programme
is running, and keep it pressed (approx. 8 seconds)
until 0000 appears in the display.
This button reduces the overall duration of the
programme cycle (washing, rinsing, spinning). This
function is suitable for washing smaller loads or lightly
soiled items in a shorter time.
Not suitable for programmes with pre wash.
Not possible with wool and delicates washing
programmes.
You can set a delay period, in hours, before the
programme is to start. Press the Delay Timer W
button repeatedly until the required number of hours
is displayed.
The default value is 0 hours, 0 minutes. Each time the
button is pressed the delay is increased by 1 hour, up
to 12 hours, and by 2 hours for the subsequent
12 hours, up to 24 hours.
Press the Delay Timer W button for approx. 3 sec..
After setting the start time, press the M Start/Stop
button. The delayed start time countdown begins.
The Delay timer LED lights up while the start time is
selected and remains on until the programme starts.
The Delay Timer W LED monitor flashes.
Once the set delay period has passed, the selected
programme begins.
19