NEFF Washer Dryer Instruction Manual And Installation Instructions page 39

Useful tools
Installation area
On the back of the washer dryer:
- Water drain hose.
- Water inlet hose
- Mains cable with plug.
Moisture in the drum is due to the final inspection
which every washer dryer undergoes before it leaves
the factory.
Spirit level for levelling the washer dryer.
Appliance stability is essential to ensure that the
washer dryer does not creep" during spin cycles.
The installation area must be firm, clean and level. Soft
floor coverings, such as carpets or foam backed floor
coverings, and parquet flooring are unsuitable.
When the washer dryer is being installed it is important
to ensure that the floor is capable of taking the loading
that the washer dryer will impose. In particular with
Floating Floors, often installed in apartment buildings,
this washer dryer needs to be sited where the floor has
been sufficiently braced so that the loads and vibration
do not damage both the washer dryer and the floor.
q Fix the supplied slide elements to the floor using
double sided adhesive tape. On porous surfaces
(e.g. screed) use an appropriate adhesive.
q Position the washer dryer on the slide elements.
q Moisten the slide elements with a mixture of water
and washing up liquid before pushing the washer
dryer into position.
Do not use grease and/or oils!
The washer dryer can be adjusted to various working
heights using the hight adjustment frame*.
39