NEFF Washer Dryer Instruction Manual And Installation Instructions page 20

Changing the start time
setting
Cancelling the start time
Opening the door
r Drying button
Changing the drying
programme
Setting the drying time
Exiting the setting mode
20
Press the Delay Timer W button repeatedly until the
required time is displayed.
Press the Delay Timer W button repeatedly until 0:00
appears in the display. The Delay Timer W LED goes
out.
When the button is pressed again, the upward time
count begins again from 0:00.
The door can be opened during the delayed start time
countdown, e.g. to add additional items for washing.
i Note the maximum load quantity. Do not overload
the washer dryer.
Press the button repeatedly until the desired
drying programme is selected.
The Auto indicator LED lights up.
Automatic drying programme selected, humidity sen
sor determines drying time, page 15.
The Time indicator LED lights up.
Time controlled drying programme selected, also ne
cessary to select the drying time.
The r Normal dry LED lights up.
Intensive drying programme: for fabrics made of cot
ton and linen E.
The J Delicate drying LED lights up.
Delicate drying programme: for synthetics, delicate
and sensitive textiles D.
Press the r Drying button repeatedly until the desi
red drying programme is selected.
After selection of the time-controlled drying program
me, press the r Drying button repeatedly until the
desired drying time is shown in the display. After ap
proximately 5 seconds, the setting mode for the
drying time is exited. The set values are adopted.
Press the r Drying button repeatedly until 0:00 ap
pears. No drying programme is selected. After appro
ximately 5 seconds, the setting mode is exited.