NEFF Washer Dryer Instruction Manual And Installation Instructions page 26

Changing the drying
programme
Wash+dry
Setting the complete
washing+drying
programme
Pausing the programme
Cancelling the programme
26
q Press the Start/Stop M button for approx.
3 seconds. The display alternates between STOP
and ---. The m Time to end LED flashes.
q Press the r Drying button repeatedly until the
required drying time is set.
q Press the J Delicate Drying button to set low
heat if desired, page 21.
Starting a new programme:
Press Start/Stop M button.
Complete washing and drying programmes for
intensive and delicates washing programmes,
page 15.
i Note the maximum permitted load for drying. Do
not overload the washer dryer.
q Select the washing programme.
q Select the required spin speed, page 21.
q Press the r Drying button repeatedly until the
desired drying programme is selected, page 20.
q Press the J Delicate Drying button to set low
heat if desired, page 21.
The display alternates between the programme length
and the selected spin speed.
q Press the Start/Stop M button.
One of the display LEDs (r Normal drying or
J Delicate drying) lights up.
i The washing+drying can be paused at any time
during the cycle.
q Press the Start/Stop M button for approx. 3 sec.
The display alternates between STOP and ---.
The Start/Stop LED flashes.
Continuing the programme:
Press the Start/Stop M button again.
Press the Start/Stop M button during the
programme cycle and keep pressed until 0000
appears in the display (approx. 8 seconds).