NEFF Washer Dryer Instruction Manual And Installation Instructions page 24

Wash only
Pausing the washing
programme
Stopping the washing
programme
Changing the washing
programme
Selecting a new
programme
24
q Set the programme selector to the required
programme, e.g. y Cottons/Coloureds 60 ºC.
The display alternates between the programme
length and the spin speed.
q Select the required spin speed, page 21.
q Select additional functions for individual
programmes, e.g. short wash or a delayed start
time.
q The drying time must be set to 0:00.
q Press the Start/Stop M button.
The LED monitor lights up. The remaining time
appears in the display.
The washing programme starts.
i Washing programmes can be paused at any time
during the cycle.
q Press the Start/Stop M button for approx.
3 seconds. The display alternates between STOP
and ---. The Start/Stop M LED flashes.
Resuming the programme:
Press the Start/Stop M button again.
Press the Start/Stop M button during the
programme cycle and keep pressed until 0000
appears in the display (approx. 8 seconds).
q Select a new programme
The display alternates between STOP and ---.
Starting a new programme:
Press the Start/Stop M button.
i After a short delay, the duration of the new program
me appears in the display.
i If the detergent compartment already contains
detergent, the new programme skips the fill phase.
i After a programme has ended (display shows End)
the washer dryer must first be switched off before
a new programme can be selected.