General; Approvals & Codes; Appliance Data - Valor 737XN Installation And Owner's Manual

3.1. Approvals & codes
This appliance is certified by International Approval Services for use in Canada and the USA. The appliance is for installation
connected to an approved 3" dia. liner or B-vent.
The appliance complies with CGA P.4.1, Testing method for measuring annual fireplace efficiencies.
The installation must conform with local codes or, in the absence of local codes with the National Fuel Gas Code, ANSI Z223.1or the
Canadian installation code CAN/CGA-149. Only qualified licensed or trained personnel should install the appliance.
The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70 or the Canadian Electrical Code, CSA C22.1

3.2. Appliance data

Altitude (ft)
Input (Btu/h) 0-2000
2000-4500
Output-Fan Off 0-2000
2000-4500
Output-Fan On 0-2000
2000-4500
Supply-Upstream of Regulator
(in w.c.)
Manifold-Tapping on
Thermostat (Appliance full on)
(in w.c.)
Pilot orifice Type
No. of holes
Front burner Type
orifice
No. of holes
Rear burner Type
orifice
No. of holes
* After adjustment
3.

GENERAL

737XN
Max. Min. Max.
28,900 9,860 28,400
25,045*
20,519 20,166
17,782*
21,390 21,443
18,910*
10.5 5.0 14.0
4.0 3.6 9.5
Cat 960-45 Cat 960-15
1
Cat 82-360 Cat 92-130
7
Cat 82-440 Cat 960-190
7
5
737XP
Min.
17,000
15,180*
11.0
9.1
1
1
1