Options; Additional Optional Features - Valor 737XN Installation And Owner's Manual

Heater engine unit 737XN is supplied for all natural gas installations.
Heater engine unit 737XP is supplied for all propane installations.
One of the following fascias is supplied with each appliance:
#772SIF Standard fascia
#774CIF Cast fascia

2.1. Additional optional features

#785BAT Brass trim kit for fascia
Facia outer surrounds
#777FSK 4" Black beveled trim – 3 sided
#778FSK 2½" Contoured black trim – 3 sided
#779FSK 2½" Contoured champagne trim – 3 sided
#781FSK 2½" Contoured black trim – 4 sided
#782FSK 2½" Contoured champagne trim – 4 sided
#783FSK 2½" Contoured etched champagne trim – 3 sided
#784FSK 2½" Contoured burgundy trim – 3 sided
#785FSK 2½" Contoured blue trim – 3 sided
#786FSK 2½" Contoured green trim – 3 sided
#787FSK 4" Black beveled trim – 4 sided
#788FSK 2½" Contoured etched champagne trim – 4 sided
#789FSK 2½" Contoured burgundy trim – 4 sided
#790FSK 2½" Contoured blue trim – 4 sided
#791FSK 2½" Contoured green trim – 4 sided
Circulating fan kit
#796CFK Operated by a 3 position switch, the fan is designed to boost the natural convection process through the heater. This may
be a desirable feature dependent on the fireplace location and room layout. The circulating fan may be installed during initial appliance
installation or as a retrofit at a later date. Full installation and operating instructions are included with the kit.
Zero clearance kit
#770ZCK Allows the furnace to be installed into an enclosure constructed of combustible material. The kit must be used in this form of
enclosure. Enclosure framing dimensions suitable for the kit are shown in section 4 of this manual. This zero clearance kit has been
designed to act as a "rough in" box with the appliance model 737X purchased and/or fitted after the walls of the enclosure and the
hearth have been fitted. Full installation instructions are included with the kit.
Clearance reduction baffle
#771CRB Allows combustible mantles to be fitted closer to the fireplace. Full installation instructions are included with the kit.

2. OPTIONS

4