Configuring The Cisco Unified Wireless Lan Controller And Access Points - Cisco 9971 Deployment Manual

Background Image
Simplified New Call UI
Enable VXC VPN for MAC
VXC VPN Option
VXC Challenge
VXC-M Servers
Revert to All Calls
80-bit SRTCP
RTCP for Video
Record Call Log from Shared
Line
Show Call History for Selected
Line Only
Actionable Incoming Call Alert
DF bit
Default Line Filter
Enable individual phone configuration files with the following commands.
telephony-service
cnf-file perphone
create cnf-files
For more information on these features, see the Cisco Unified IP Phone 9971 Administration Guide or the Cisco Unified IP
Phone 9971 Release Notes.
http://www.cisco.com/en/US/products/ps10453/prod_maintenance_guides_list.html
http://www.cisco.com/en/US/products/ps10453/prod_release_notes_list.html
Configuring the Cisco Unified Wireless LAN Controller and Access
Points
When configuring the Cisco Unified Wireless LAN Controller and Access Points, use the following guidelines:
Ensure CCKM is Enabled if utilizing 802.1x authentication
•
Set Quality of Service (QoS) to Platinum
•
Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide
defaultWallpaperFile
simplifiedNewCall
enableVXCVPNForMAC
vxcVpnOption
vxcChallenge
vxcManagers
revertToAllCalls
SRTCP80bit
VideoRTCP
logCallFromSharedLine
showCallHistoryForSelectedLine
actionableAlert
dfBit
defaultLineFilter
<Wallpaper_file>
0 = Disabled; 1 = Enabled
<MAC_Address>
Example: FFFFFFFFFFFF
0 = Dual Tunnel; 1 = Single Tunnel
0 = Challenge; 1 = No Challenge
x.x.x.x
0 = Disabled; 1 = Enabled
0 = Disabled; 1 = Enabled
1 = Enabled; 0 = Disabled
0 = Disabled; 1 = Enabled
0 = Disabled; 1 = Enabled
0 = Disabled ; 1 = Show for all Incoming Call; 2=
Show for Invisible Incoming Call
<0,1>
<Line_Numbers>
56