Controller Settings - Cisco 9971 Deployment Manual

wlccp authentication-server infrastructure method_Infrastructure
wlccp authentication-server client mac method_Clients
wlccp authentication-server client
wlccp authentication-server client
wlccp wds priority 255 interface BVI1

Controller Settings

Ensure the Cisco Unified Wireless LAN Controller hostname is configured correctly.
Enable Link Aggregation (LAG) if utilizing multiple ports on the Cisco Unified Wireless LAN Controller.
Configure the desired AP multicast mode.
In releases prior to 6.0, Aggressive Load Balancing was configured in the General Controller settings.
In 6.0 and later, this is referred to as Client Load Balancing and is configurable under the WLAN configuration (SSID settings).
If utilizing multicast, then Enable Global Multicast Mode and Enable IGMP Snooping should be enabled.
Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide
eap method_Clients
leap method_Clients
62