Auto Rf (Rrm) - Cisco 9971 Deployment Manual

Unified ip phone wireless lan deployment guide

Hide thumbs Also See for 9971:

Table of Contents

Auto RF (RRM)

When using the Cisco Unified Wireless LAN Controller it is recommended to enable Auto RF to manage the channel and

transmit power settings.

Configure the access point transmit power level assignment method for either 5 or 2.4 GHz depending on which frequency band

is to be utilized.

If using automatic power level assignment, a maximum and minimum power level can be specified.

If using 5 GHz, it is recommended to enable up to 12 channels only to avoid any potential delay of access point discovery due

to having to scan many channels.

The 5 GHz channel width can be configured for 20 MHz or 40 MHz if using Cisco 802.11n Access Points.

Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide

Table of Contents