Table of Contents
Advertisement
14.
Call screening
When the answering machine is on and takes a call, you can use the
loudspeaker to listen to the caller leaving a message.
The handset display will show « SCREEN? ». Press Menu/OK/Secrecy to
begin screening the call via the handset. If you wish to take the call while
screening, press Talk/Handsfree.
15.
Memory full
If there is less than 35 seconds recording time left in the memory, the caller
will hear, "Please complete your call within 35 seconds", after the outgoing
message and before recording tone.
If the memory becomes full during recording the machine announces, "Sorry,
the memory full", and ends the call.
When the memory is full, the machine automatically switches to the Answer
Only outgoing message.
Your Pyramid product can store up to a maximum of 60 minutes recording or
59 messages.
X.
Using remote access
You can operate your answering machine from any Touchtone™ phone by
calling your Pyramid product and entering a 3 digit security PIN code.
The default PIN setting is 000. To change it, see 'Set the security PIN code'
on page 37. Using a PIN code prevents other people from accessing your
answer machine and messages without permission.
1.
Operating your answering machine from another phone
1.
Dial your telephone number. When you hear your outgoing message, press
*/Keypad lock. The machine announces, "Please enter your security code".
2.
Enter your 3-digit PIN (default setting 000) within 8 seconds. You will hear,
"You have 'n' new messages" and they will be played back.
Note: If you enter an incorrect PIN code you will be allowed one further
attempt, if it is still incorrect you will hear "Incorrect security code" followed by
a beep and then your Pyramid product will hang up.
36
Advertisement
Table of Contents
