Appendix 1 Battery Module
27
Appendix 1 Battery Module
Appearance
The protective panel has been installed at the factory to avoid the damage to the battery module during the
transportation. Remove the six screws to take off the protective panel.
The standard UPS has a battery module. The appearance of the battery module is shown in Figure 1.
Screw (6 pcs)
Protective panel
Figure 1 Battery module
Rear panel
Operation panel on the front panel of the battery module is not available.
The battery module provides battery ports, battery fuse box and ventilation holes on the rear panel, as shown in
Figure 2.
Battery port 1 Battery port2
Ventilation holes
Battery f use box
Figure 2 Rear panel of the battery module
iTrust Adapt 6kVA UPS User Manual