Specifications; Leds - Bosch Radion B810 Reference Manual

26 en | RADION repeater
4.3

Specifications

Dimensions
Compatible plug-in transformers
RFRP-A:
– BOSCH CX4010 Plug-in Transformer – F.01U.020.504 (110 VAC primary voltage input, 18 VAC, 22
VA)
– BOSCH D1640 Plug-in Transformer – 4.998.125.832 (16 VAC, 40 VA
– MG Electronic (MGT-1640), primary rated 120 VAC, 60 Hz, 0.48 Amps, secondary rated 16.5 VAC,
40 VA
– Codex (SEP-1640), primary rated 120 VAC, 60 Hz, 0.48 Amps, secondary rated 16.5 VAC, 40 VA
– TDC Part No (DA-22-18), primary rated 120 VAC, 60 Hz, 30 Va, secondary rated 18 VAC, 1.3 Amps,
22 VA
Power/Voltage
(Standby battery) RFRP-A
Transformer power/voltage
Current Draw
Wire Gauge
Temperature (operating)
Relative Humidity
Device testing
Wall and Cover Tamper Switch Transmits a tamper signal when someone removes the device from its
Frequency
Table 4.1: Specifications
4.4

LEDs

The repeater utilizes an external LED indicator to status the operation of the repeater. Refer to
the table below for LED descriptions.
LED Condition
On (Normal)
Off
Continuous Flash: 1 sec
rate for 5 sec
2014.03 | 06 | F.01U.261.834
139.70 mm x 209.60 mm x 31.80 mm
(5.50 in x 8.25 in x 1.25 in)
16.5 VAC, 40VA (~)
Rated 3.7 VDC, 3050mAH EVE ENERGY CO Part No P0046-LF (Not user
replaceable). For standby battery to be operative, the tamper switch is
required to be engaged.
120VAC, 60 Hz, 30 Va, or 120VAC, 60 Hz, 0.48 Amps
60 mA
0.65 mm (22 AWG) to 2.0 mm (18 AWG)
0ﾟC to +49ﾟC (+32ﾟF to+120ﾟF)
0% to 93% (non-condensing)
To ensure proper functionality, the device must be tested at least once
every year by an installer.
base or pulls it away from the wall.
433.42 MHz
Pattern Description
– Indicates the repeater is functioning normally.
– Indicates there is a power failure to the repeater, or that the
receiver is not wired correctly.
– Indicates the repeater is being powered up, and conduction
manufacturing test initializations.
Reference Guide
RADION receiver SD
Bosch Security Systems, Inc.