Radion Smoke - Bosch Radion B810 Reference Manual

RADION receiver SD
9

RADION smoke

The RFSM-A is a non-latching wireless smoke detector that sends an alarm signal to the
receiver.
The following features include:
–
–
–
Replaceable optical chamber
Power/voltage
Current draw
Battery replacement
Battery life
Device testing
Sensitivity
Temperature (operating)
Relative humidity
Cover and wall tamper switch
Drift compensation adjustment
Sounder
Self-diagnostics feature
Frequency
Table 9.1: Specifications
Bosch Security Systems, Inc.
A visual status LED
A built-in sounder for alarm alerts
Under normal conditions, the red LED flashes once every 8 sec while the sensor monitors
the surrounding environment. When the sensor detects smoke, the LED changes from
flashing to steady ON and the sounder produces a loud, continuous tone. Refer to the
LED table for more information.
For easy maintenance
Two CR123A Lithium batteries, 3 VDC (
Standby: 45 uA
Alarm: 70 mA
Duracell DL123A, Panasonic CR123A, or Sanyo
CR123A. Check your batteries yearly to ensure proper
functionality.
Minimum of 5 years or greater
To ensure proper functionality, the device must be
tested at least once every year.
0.14+/- 0.04 bM/m (0.97 – 2.99%/ft obscuration –
RFSM-A only)
Functional range: -10ﾟC to +49ﾟ(+14ﾟF to +120ﾟF
UL only: 0ﾟC to +49ﾟC (+32ﾟF to +120ﾟF)
0% to 93% (non-condensing)
Transmits a tamper switch signal when the detector is
removed from its base, or the unit is pulled away from
the wall.
-1.64%/m (0.5%/ft) maximum
85 dBA at 3 m
Monitors detector sensitivity and operational status.
433.42 MHz
Reference Guide
RADION smoke | en 39
)
2014.03 | 06 | F.01U.261.834