Battery Requirements - Bosch Radion B810 Reference Manual

RADION receiver SD
Wiring gauge
Compatible SDI2 control panels
Wall and cover tamper switch
Table 3.1: Specifications
3.5.1

Battery requirements

Use sealed lithium or alkaline batteries for supported RADION wireless system peripherals.
Replace the batteries annually to ensure optimal performance.
Notice!
Dispose of used batteries according to manufacturer's instructions.
Warning!
The batteries used in the RADION transmitters might present a risk of fire or chemical burn if
!
mistreated. Do not recharge, disassemble, heat above 100ﾟC (212ﾟF), or incinerate. Replace
battery with battery manufacturer's name or end product manufacturer's name and part
number only. Use of another battery might present a risk of fire or explosion.
Battery requirements
RADION Device
B810 receiver
RFPR-12-A PIR
motion detector
RFPR-C12-A PIR
motion detector
RFRP-A repeater
RFSM-A smoke
detector
RFUN-A universal
transmitter
RFBT-A bill trap
RFDL-11-A TriTech
detector
Bosch Security Systems, Inc.
Battery Size Battery Type
CR123A Lithium
CR123A Lithium
Non- Lithium polymer
replaceable
CR123A Lithium
CR123A Lithium
AAA Lithium
AA Alkaline
Reference Guide
RADION receiver SD | en
0.65 mm (22 AWG) to 2.0 mm (18 AWG)
maximum
GV4 Series v2.00 and above (D9412GV4,
D7412GV4)
B5512
B4512
B3512
Transmits a tamper signal when someone
removes the device from its base or pulls it
away from the wall.
Cell Voltage
None
3 VDC
3 VDC
3.7 VDC nominal
3 VDC
3 VDC
1.5 VDC
1.5 VDC
23
Quantity (Cells)
1
1
1
2
1
1
4
2014.03 | 06 | F.01U.261.834