Valor Portrait 530ILN Installation & Operating Instructions Manual page 14

See venting accessories list on pages 36–37 for allowable components.
Co-linear Venting into Existing Solid-Fuel
Burning Fireplaces and Chimneys
Co-linear adapter may be installed as top or rear
outlet—see Conversion to Top Outlet for Solid Direct
Vent Co-axial Piping in Appliance Preparation section
for conversion to top outlet.
• Co-linear and co-axial venting may be combined
in a single venting system provided conversion is
done only once using approved components and
maintaining proper clearances;
• Three-inch liners may only be installed into solid-
fuel burning fi replaces and chimney systems (no
combustible construction);
• The appliance must not be connected to a
chimney fl ue serving a separate solid-fuel burning
appliance.
556CLA Kit
2 x 3" liners
3/4"
556CLA
25-1/4"
9 to 11-1/2" depending
of front used - see front manual
556CLA
Rear Mounted
Alternate to 556CLA/559CLT/559FSK Conversion
Co-Axial to Co-Linear
Adapter
14 14
Vertical Termination Venting Confi gurations
556CLA
2 x 3"
liners
3/4"
25-1/4"
9 to 11-1/2" depending
of front used - see front manual
556CLA
Top Mounted
Terminal Cap
3" min.
2 x 3"
bend radius
liners
Co-linear
adapter
18" max.
horizontal run
24-1/2"
Co-Linear installation into existing F/P
10"
10"
7-5/8" dia.
collar
3" Inlet & Exhaust
Collars
559CLT Co-Linear Terminal
Co-Linear to Co-Axial
Adapter
Flashing
Approved co-linear
termination or approved
co-linear adapter
and approved
Flashing co-axial
termination
40'
max
8'
min
2 x 3"
530
liners
engine
Co-linear
adapter
559FSK Flashing Kit