Setting the net-
work
The Ethernet connection is configured in the
work can be configured on the machine display or using the web in-
terface. Before the machine is connected for the first time, e.g. to a
network printer, the network must be configured on the machine dis-
play. To set the printer up in the web interface, see the programming
manual.
You will receive the information required for configuring the network
from your network administrator.
Network
Press the
The network configuration parameters are displayed. The buttons
next to the parameters open the on-screen keyboard.
Enter the required values for each parameter and press OK to con-
firm.
Use the IP address or the Host name to address the machine in the
network.
Manual entry
Parameter
Active
DHCP
IP address
Subnet mask
Prefix length
Host name
Standard gateway
Automatic assignment
Parameter
Active
DHCP
IP address
Subnet mask
Prefix length
Host name
Standard gateway
button.
Report version IPv4
Active
Inactive
Input field
Input field
–
Input field
Input field
Report version IPv4
–
Active
–
–
–
Input field
–
System settings
Network
menu. The net-
Report version IPv6
Active
Inactive
Input field
–
Input field
Input field
Input field
Report version IPv6
–
Active
–
–
–
Input field
–
55