Camera Setup; Record Setup - Revo Digital video recorder User Manual

Push Settings (NETWORK  Push Tab)

CAMERA SETUP

Camera Settings
 PTZ Port Setup...: Select the button and set up the PTZ device you are connecting to
the DVR. Check the Enable RS485 box and set the port's setting according to the PTZ
device manufacturer's instructions.

RECORD SETUP

Record Settings (RECORD  Settings Tab)
 Push: Selecting the box enables the Push Notification
service.
 Push Server: Displays the push server address.
 Ignoring Time: Set the push ignoring dwell time. The DVR
will not send callback messages during the preset interval
range when the same event is detected.
 No.: Selecting the box toggles all or each camera On and
Off.
 Title: Change the name of all or each camera.
 PTZ Model: Select the PTZ device you wish to configure
from the list.
 ID: Set the PTZ ID of each camera.
 Recycle When Disk Full: Selecting this box records over
the oldest video data once all available storage space has
been used. When the box is not checked, the DVR stops
recording once all available storage has been used.
 De-Interlace: Selecting the box toggles between On and
Off. When set to On, the DVR will turn the de-interlace
filter on while recording video with Very High (D1)
resolution.
16 Channel Digital Video Recorder
21