Revo Digital video recorder User Manual page 25

RTSP Settings (NETWORK  RTSP Tab) (Blackberry Users and Others)
NOTE: Selecting Use Mobile sets the REVO Remote service to be enabled automatically regardless of your
Network – General settings.
NOTE: When using NAT (Network Address Translation) or firewall services, opening all UDP ports allows you
to access a DVR using Blackberry and Android devices.
NOTE: You can access a remote DVR and monitor live video images using media players, such as VLC Player,
supporting RTSP service. Start the media player on your local PC and enter "rtsp://ID:Password@IP address:
RTSP port number/trackID='channel number'", or start Internet Explorer on your Blackberry or other mobile devices
and enter "http://IP address:REVO Remote port number/".
NOTE: Some media players might play video properly depending on network conditions.
NOTE: RTSP service might not be supported, depending on the type of media player.
Mail Settings (NETWORK  Mail Tab)
 Recipient: Enter the recipient's e-mail address and select the mail server provider.
The e-mail address must include the "@" character to be a valid address.
 : Deletes the mail accounts.
 SMTP Server: Select the button and set up the SMTP server.
Type – Select between Manual and listed SMTP mail server providers.
SMTP Server – Enter the SMTP server IP address or domain name obtained
from your system administrator.
NOTE: You will need to get the IP address or domain name of the SMTP
server from your network administrator. You can use the domain name
instead of IP address if you set up the DNS server during Network setup.
Port – Set the SMTP server port number obtained from your system administrator.
Use SSL/TLS – Check the box when sending an e-mail via an SMTP server
requiring SSL (Secure Sockets Layer) authentication.
 Enable RTSP: Selecting the box enables the RTSP
(Real-Time Streaming Protocol) service. You will be able
to change the settings if Enable RTSP is enabled.
 RTSP Port: Set the port number of the RTSP server
obtained from your system administrator.
 RTP Port: Set the Start Port and End Port numbers of the
RTP server obtained from your system administrator.
 Use Mobile: Select the box when using Blackberry or
other mobile devices.
 No.: Selecting the box toggles all or each Recipient On
and Off.

: Adds a mail recipient.
16 Channel Digital Video Recorder
19